Confirm it is a complete plug-in device

A listing that only shows a panel, microinverter or cable is not comparable with a complete plug-in solar kit. The named model should tie the panels, microinverter, mounting and connection route together.

Check which mounting equipment, cables, delivery and electrical work are included in the advertised price.

  • Device manufacturer and model written exactly
  • Panels, microinverter, mounting and cable route stated
  • Seller makes clear whether it is a complete kit or only a part

Separate panel watts from socket output

Some compliant devices use panels with a combined capacity above 800W. The important comparison point is that the device limits the power going into the home socket to the permitted 800W.

An output cap alone is not proof of compliance. Check the exact complete device in the current register and follow its installation requirements.

  • Panel capacity shown separately from socket output
  • 800W output cap explained by the seller
  • Exact make and model checked against the ENA register

Common questions

Should I compare panel output alone?

No. Output matters, but it should be read with exact device model, kit contents, socket-output cap and ENA status.

Can a kit above 800W still be compliant?

Yes, if the compliant device limits power entering the socket to 800W. The panel capacity and the socket output are different lines in the comparison.

Before you buy

Guidance checked 5 September 2026. Check the latest advice and your exact product before ordering; a comparison is not an electrical or structural survey.

Battery route

Separate storage products from socket-only solar.

Open guide

Socket checks

Check permissions, socket suitability and registration.

Open guide